12 // 15 março 2020
Spin Time, Roma, Italy
- 12 // 15 março 2020 | Foyers, Meeting Area Lectures, Classroom 3, Classroom 2, Classroom 1, Spin Time, Roma, Italy
- 12 // 15 março 2020 | Auditorium, Spin Time, Roma, Italy
- 12 // 15 março 2020 | Sala L, Spin Time, Roma, Italy
- 12 // 15 março 2020 | Sala L Mapping, Spin Time, Roma, Italy
Festival
Duração (minutos)
30
O que é preciso
- 1 Projector (1920x1080 hdmi on stage)
- 1 PA
- 1 Audio mixer (2ch JACK? RCA? MiniJACK?)
- 1 table 2x1m
- 2 x D.I. Box
- 2 x 2 ways wedge monitors or Side fills (separate Aux send L-R)
- 1 x Front stage truss (min. 3m H) to hang up Laser projector by a standard clamp (Aliscaf)* center stage. Alternative: a 3m tripod with platform(eg. Manfrotto) at the FOH. A 220v, 50Hz Power strip is needed in the same place.(*) My ILDA cable is 25 meters long, it starts from the table center stage.
- 1 Hazer machine
- 1 strobe flash light eg. Atomic 3000 on stage, controllable from the table** (**) no other light projectors must be active during the show
- 1 Power strip (5 x EU-standard slot) 220V/50Hz (on table)
- laser can cover large surfaces with enough distance.
- 30 minutes setup time and sound check on the house systems with the aid of the local technicians.
O que os artistas trazem
Laser projector 1W, 25 meters ILDA cable, Laptop, midi controller, analog synth
